6 Posts - Page: 1

carby idea

Weekend1000
Perth WA
Joined: 08-Sep 2011
57 posts
Post #1 | Wednesday, 27-Jun 2012 @ 9:25pm
thinking about grafting a single SU carb to the side of an A15 H95 manifold.
My 1000 is in storage so could someone measure the distance between the right side of the head and the inner guard
(i cannot call it a strut tower)
Cheers
Mal
gx1200
adelaide, australia
Joined: 12-Jun 2011
8 posts
Post #2 | Thursday, 28-Jun 2012 @ 8:08am
Approx 300mm from head to where the top of the rubber (inner skirt) sits. obviously more distance the higher up you go.
Hope this helps.
Adam.
 
"Live life, follow your dreams",
Peter Brock
Weekend1000
Perth WA
Joined: 08-Sep 2011
57 posts
Post #3 | Friday, 29-Jun 2012 @ 4:36pm
thanks for the measurement
the H95 inlet is 155mm wide and an SU is about 100mm so there is not much room left for air an cleaner.
Dundee1000
Fremantle
Joined: 11-Feb 2011
612 posts
Post #4 | Friday, 29-Jun 2012 @ 5:19pm
face it forward Mal...
Weekend1000
Perth WA
Joined: 08-Sep 2011
57 posts
Post #5 | Friday, 29-Jun 2012 @ 5:26pm
with an elbow
any suggestions for asuitable single SU for a stock A12 or A15?
Neil
Perth Western Australia
Joined: 03-Mar 2011
492 posts
Post #6 | Friday, 29-Jun 2012 @ 9:07pm
1.5" should do it
6 Posts - Page: 1