Hi,

Thought I'd mention the setup that I put in a short while ago.

It is nothing special but it has had a big improvement, I used the 7/8ths master cylinder from a 720 ute, it's a big bugger and needs more push and travels a little less than the stock master cylinder.

I had to adapt the pushrod from the original master to the bigger 7/8ths unit.

This unit can also be aplied to the 120y booster if you have plans to boost the brakes also. I have some 120y booster adapters getting made up that save you from having to drill more holes in the firewall, so it makes the whole procedure a straight bolt-on.

Just thought I'd put it out there as many tend to go with the 120y cylinder which seems to attract alot more money. Here us a link to a brand new unit that you might want to consider, perhaps inquire about the postage costs because I think they may actually be cheaper than what they say.

Mexican Master Cylinders

Here is the adapter bracket thingymahjig. The four-bolt flange is the one that bolts to the small can booster and the two bolt flange goes to your firewall. I'm making these up soon. Like I said not much to get excited  about but these save you having to unnecessarily drill new holes.

The text editor I'm using for this site is called tinyMCE. It was originally intended to edit HTML code, but it's been adapted for this site to create BBcode. The image button brings up a popup with features that aren't included in BBcode. For example, image size.

Unfortunately, what you'll have to do is resize the image before uploading it.

In the future, depending on free time, I may implement an "upload image" feature within the site, so that you don't have to upload to other sites like photobucket etc.

So when you want better pedal feel, people go with a larger bore cylinder? Just a little unsure what this does to the brakes. Would a 11/16" one still be OK if it could be had for cheap?
You have mentioned that the pedal travel is less, is this always the case and is there enough to allow heel toe driving?

i'd be pretty interested in one of these setups, are you doing a group buy sorta thing chris?

oh rito so just the brackets, let us know when your gettin em done

are you using aluminium, stainless or mild steel?

polished ss would look nice *drool*,  if you wanted to you could send them to me and i could tig weld them if it's cost effective