Hello im trying to buy all new things for my 1000. So just trying to find out what all the parts I need are so what I know I will post please add to it thanks!
 
Engine
Alternator
Carby
Starter motor
Exhaust
Spark plugs
Flywheel
Gearbox
Spark plug leads
Altinator manifold
Radiator
Water pump
 
Not sure what else?
 
Thanks alot ahead of time hard to know when I havnt done it before...

Holy dooly i dont even know how to begin answering this...
 
are all those things broken? Most of those things even if they werent broken you would be better off keeping the money and buying bits that are broken until all your bits arent broken then spend money on some nicer rims or performance mods!?!?
 
i noticed your looking at putting an l16 into a 1000? Is this cause the a12 is stuffed? 
 
Need more info if possible, then the smart fellows on here can help you to the moon

Are you going to have this car registered? I think that the cost of all the bits you need for the L16 and then to get it engineered will far out weigh the cost of a nice hot little A series motor. You can do some pretty awesome things with the A series (check Reubytuesdays build) and they look far better than an L. Personally I think the L motor will be way to much hassle especially if you have not modified a car before, they become money pits....unless you've got heaps!

Check out eBay at the moment there is a sunny with a A15 and 4 speed, good for a rebuild or there is a pretty hot A12 for 5k (which I think is high) and I'm pretty sure noteven on this site has a motor for sale. It's not that the L16 won't fit it's just a very tall motor which requires a lot of mods, have you spoken with an engineer or found out what the requirements are for you to get reg? That would at least give you an idea because you will need brake upgrade, modified tranny tunnel and altered front end and that's just a couple.

Theres a rebuilt L16 on ebay for 660 and I know that dude who sells them and he will make it 600, his name is Davor Rajic and is very negotiable with these old stock engines, L16 will go well with boost and 5 speeds are easy.
 
You will need as mentioned before a custom sump, shortened waterpump or electric waterpump at least
to fit properly and remove bottom part of drain channel on the firewall.

You can even slant it a tad to bias a better inlet manifold/exhaust setup etc.
 
L16 revvs like crazy with just good springs, l20b electric dizzie, mild cam, lightened flywheel, cast L20 exhaust manifold and twin sus, especially with L18 crank, L16 rods and milled L18 SSS slugs etc

Hi mate sorry for the delay no spare A14 but have a couple of A12's

Thanks for the reply, are any of that a12 engines in working order? And I am looking for some kb10 seats not sure of you would have them but worth an ask? 
 
And nor sure what else I need at the moment but I will keep you in mind thanks.