9462 Posts - Page: Previous | 1 | ... | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | ... | 474 | Next

Recent Posts for the Entire Site

reubytuesday
Coondle, WA
Joined: 20-Mar 2011
323 posts
Post #501 | Friday, 13-Dec 2019 @ 3:26pm
"You can fit it in without tunnel mods I spose.   That just means it all sits lower, and with the 1000 front cross member in the way, the sump would foul i would expect.   The T50 is a good box for the 1k, espcially since they can be had for around $500 or..."
T50 Question  |  Read full post
SchuMi2
Melbourne
Joined: 10-Feb 2017
41 posts
Post #502 | Friday, 13-Dec 2019 @ 3:11pm
"Thanks RT...my main concern was the tunnel. I have a few T50 boxes lying around for the 22 so I thought I might as well use one. Sitting one up in the tunnel it looks like it clears OK but without the bell housing, exact positioning is only a guess."
T50 Question  |  Read full post
reubytuesday
Coondle, WA
Joined: 20-Mar 2011
323 posts
Post #503 | Friday, 13-Dec 2019 @ 9:59am
"Yeah, I have done the T50.   Depending on which T50 box you use (there are 3 types from memory) with each one having the gear stick in a different position.   You will need to move the gear stick hole.   You will also need to make the tunnel slightly..."
T50 Question  |  Read full post
beetwenty
Gold Coast, Australia
Joined: 05-Feb 2011
1183 posts
Post #504 | Wednesday, 11-Dec 2019 @ 10:10am
"Not a problem at all.   Im glad to hear you got it sorted."
Datsun 1000  |  Read full post
peter71
hervey bay
Joined: 06-Dec 2019
7 posts
Post #505 | Wednesday, 11-Dec 2019 @ 7:54am
"ASH  just phone different pedders  they can have them tomorrow $94 each  monday i was in pedders local shop and they did not exist would take of car and measure  and they would cost over $150 each if they could get something THANKYOU"
Datsun 1000  |  Read full post
beetwenty
Gold Coast, Australia
Joined: 05-Feb 2011
1183 posts
Post #506 | Wednesday, 11-Dec 2019 @ 7:41am
"This is years ago.   But i bought my old shocks with me to pedders as my car was still an unregistered project at that stage. I had one of the staff at pedders remove the pins from my old shock absorbers and fit them into the new shock absorbers that i..."
Datsun 1000  |  Read full post
peter71
hervey bay
Joined: 06-Dec 2019
7 posts
Post #507 | Wednesday, 11-Dec 2019 @ 7:17am
"thanks ash  well just hope pins are still  making new ones that not about happen  that will just be another problem im starting to run around like chook with head cut off"
Datsun 1000  |  Read full post
beetwenty
Gold Coast, Australia
Joined: 05-Feb 2011
1183 posts
Post #508 | Tuesday, 10-Dec 2019 @ 8:18pm
"Strange that pedders say they dont have a listing. Their web page shows some 1000 bits. https://www.pedders.com.au/catalogue/all/nissan/1000/   Their in house part number for the front shocks is 3029 Failing that, I have heard a few 1000 owners say they..."
Datsun 1000  |  Read full post
peter71
hervey bay
Joined: 06-Dec 2019
7 posts
Post #509 | Tuesday, 10-Dec 2019 @ 7:15pm
"Cheers"
IDLER ARM  |  Read full post
peter71
hervey bay
Joined: 06-Dec 2019
7 posts
Post #510 | Tuesday, 10-Dec 2019 @ 7:15pm
"Does anyone know where i can get front shocks I have already tried Pedders and Fulcrum and its not in there records ive tried aftermarket and suspension specalists  Does anyone know where i can either get gas or coil over shocks    Thanks"
Datsun 1000  |  Read full post
SchuMi2
Melbourne
Joined: 10-Feb 2017
41 posts
Post #511 | Tuesday, 10-Dec 2019 @ 9:23am
"Hi all,    Before I dive in and purchase a bellhousing to fit the T50 box into a 1000 I have a question for anyone that has done this conversion.   Does the tunnel need any mods itself?    Mounts etc I don't have a concern with, just the tunnel.   Thanks."
T50 Question  |  Read full post
beetwenty
Gold Coast, Australia
Joined: 05-Feb 2011
1183 posts
Post #512 | Sunday, 08-Dec 2019 @ 8:33pm
"Hi Peter.   I believe an early datsun 1200 idler arm is a bolt in replacment for a 1000."
IDLER ARM  |  Read full post
beetwenty
Gold Coast, Australia
Joined: 05-Feb 2011
1183 posts
Post #513 | Sunday, 08-Dec 2019 @ 8:28pm
Edited by beetwenty
Sunday, 08-Dec 2019 @ 8:31pm
"Thanks Dundee.   Any chance of a picture of your motor in grey?   I like having a black engine bay as I can bang spanners into things and just use a can of black spray paint to repair any clumsy mistakes. Also untidy wiring harnesses hide well on a black..."
Beetwenty's B10 2 door  |  Read full post
Dundee1000
Fremantle
Joined: 11-Feb 2011
612 posts
Post #514 | Sunday, 08-Dec 2019 @ 7:27pm
Edited by Dundee1000
Sunday, 08-Dec 2019 @ 7:28pm
"ummmmm, My A14 in the Red wags is in fact holden Grey motor grey...    that rocker cover looks awesome..."
Beetwenty's B10 2 door  |  Read full post
peter71
hervey bay
Joined: 06-Dec 2019
7 posts
Post #515 | Sunday, 08-Dec 2019 @ 6:59pm
"LOOKING for idler arm or replacement if some one can tell me how to replace or fix"
IDLER ARM  |  Read full post
reubytuesday
Coondle, WA
Joined: 20-Mar 2011
323 posts
Post #516 | Sunday, 08-Dec 2019 @ 6:42pm
"Thanks for that tip ash.   Im hoping that a standard crank seal will cover the bottom one and maybe a standard mazda seal for the timing pulley and fits on the camshaft.   I know that Rob (the evil mastermind behind this) would have used off the shelf..."
Reuby Tuesdays 4 door sedan project  |  Read full post
beetwenty
Gold Coast, Australia
Joined: 05-Feb 2011
1183 posts
Post #517 | Sunday, 08-Dec 2019 @ 6:27pm
"I dont have any part numbers for you sorry Reuby T.   Small chance of it... but if you end up buying seals based on physical sizing be aware that alot of seals are rotation direction specific. They have little angled grooves inside.   So take note of..."
Reuby Tuesdays 4 door sedan project  |  Read full post
reubytuesday
Coondle, WA
Joined: 20-Mar 2011
323 posts
Post #518 | Sunday, 08-Dec 2019 @ 5:41pm
Edited by reubytuesday
Sunday, 08-Dec 2019 @ 5:54pm
"Thank D for that feedback.   After getting some other opinions and just thinking about it - your right a standard pulley - no harmonic balencer will be fine for now. - I can get carried away with that detail later if need be.   I had 5 mins to play with..."
Reuby Tuesdays 4 door sedan project  |  Read full post
beetwenty
Gold Coast, Australia
Joined: 05-Feb 2011
1183 posts
Post #519 | Sunday, 08-Dec 2019 @ 5:06pm
Edited by beetwenty
Sunday, 08-Dec 2019 @ 6:52pm
"I think i agree with you about the blue D. So a red or black engine block before it goes in then?   If I went Red I would try my best to keep the intensity of the red down on the engine block and try for a factory-ish looking shade of red.   Maybe just a..."
Beetwenty's B10 2 door  |  Read full post
d
Oz + JPN
Joined: 23-Apr 2011
1432 posts
Post #520 | Sunday, 08-Dec 2019 @ 2:50pm
"The anal make up in me no longer loves any datsun blue in your engine bay    Red, black and alloy bits with that cream is all my anus wants to see so.... .....will make sure I keep my pants on at all times from now on when perving at your work "
Beetwenty's B10 2 door  |  Read full post
9462 Posts - Page: Previous | 1 | ... | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | ... | 474 | Next