| Clearance between
piston cyl. bore |
0.03 - 0.04 (at 20 Deg c) |
| Fixing direction |
F mark to front side Con. Rod (Oil hole to camshaft side) |
| Piston oversize |
S.T.D. 0.25, 0.50, 0.75, 1.00, 1.25, 1.50 |
| Measure with feeler-gauge between piston
& cyl. Bore |
Pull out measuring 0.5-1.5 Kg with 0.03mm thickness feeler |
| Clearance between piston groove &
ring |
Within 0.20mm |
| Piston ring end gap |
Within 1.0mm |
| Piston ring over size |
S.T.D. 0.25, 0.50, 0.75, 1.00, 1.25, 1.50 |
| Method of inserting piston & pin |
Press fit to piston and con. Rod small end (1 - 1.5t) |
